← Back to Volume 7, Issue 1

Optimization of Digital Speckle Patterns and Its Application in Measuring Crack-Tip Deformation Fields of CNTs/PDMS Composites

Huan Liu
Vol.7, No.1, pp.64-73, 2025 DOI: 10.62051/ijmee.v7n1.06 September 27, 2025
Download PDF
Abstract: An improved algorithm for generating digital speckle patterns is proposed. This method introduces a minimum spacing constraint and a multi-shape random distribution strategy to overcome two common limitations of conventional approaches: limited morphological diversity and undesirable overlap at high densities. A comprehensive evaluation was performed using four key parameters: speckle size, mean intensity gradient, systematic error, and random error. The digitally designed speckle patterns were transferred onto a CNTs/PDMS composite via a non-destructive technique. This approach successfully enabled the measurement of deformation fields in the crack tip region under large-strain conditions. Based on the experimental results, the fan-shaped zoning characteristics of the deformation field near the crack tip were analyzed. The experimental results validate that the speckle patterns produced by the proposed algorithm are high-contrast and well-distributed, demonstrating significant potential for applications in fracture mechanics studies of flexible composites.
Keywords: Digital Speckle, Digital Image Correlation (DIC), CNTs/PDMS Composite, Crack-Tip Deformation Field
APA Citation: Huan Liu (2025). Optimization of Digital Speckle Patterns and Its Application in Measuring Crack-Tip Deformation Fields of CNTs/PDMS Composites. International Journal of Mechanical and Electrical Engineering, 7(1), 64-73. https://doi.org/10.62051/ijmee.v7n1.06

References

  1. Zhan N, Zhang X, Ye J, et al. High-precision parameter-free optical distortion measurement and correction via digital image correlation[J]. Optics & Laser Technology, 2024, 177: 111129.
  2. Y. Lin-Tao, S. Xin-Xing, G. Liu-Ning, et al., "Research and application of camera arrangement strategies in multi-camera digital image correlation systems," Journal of Experimental Mechanics, vol. 40, no. 3, pp. 313–324, 2025.
  3. Z.-N. Chen, "Optimization of digital speckle patterns and its application," Ph.D. dissertation, Southeast University, Nanjing, China, 2018.
  4. Ghorbani R, Matta F, Sutton M A. Full-field deformation measurement and crack map on confined masonry walls using digital image correlation[J]. Experimental Mechanics, 2015, 55(1): 227-243.
  5. Zhu C, Ekinci H, Pan A, et al. Electron beam lithography on nonplanar and irregular surfaces[J]. Microsystems & nanoengineering, 2024, 10(1): 52.
  6. Jalilluddin A M, Nazri F M, Zulkefli M U. Prefabricated Speckle as Enhancement of Digital Image Correlation Speckle Patterning Efficiency for Masonry Testing[J]. MethodsX, 2025: 103577.
  7. Sanchez A C, Kim D K. Assessment of the Film-Free Water Decal Method for Speckle Pattern Application in Digital Image Correlation[J]. Sensors, 2024, 24(17): 5657.
  8. Luo H, Liu J, Luo H, et al. Parametric fabrication technique of high-temperature speckles for digital image correlation via free dispensing[J]. Optics and Lasers in Engineering, 2025, 186: 108752.
  9. Y. Su, "Research on evaluation criteria for speckle quality in digital image correlation technology," Ph.D. dissertation, University of Science and Technology of China, Hefei, China, 2016.
  10. Y. Su, Y. Gao, Z.-R. Gao, et al., "Guanghui: A free and open-source software for digital speckle pattern generation and evaluation," Journal of Experimental Mechanics, vol. 36, no. 1, pp. 17–28, 2021.
  11. Q.-T. Li, J. Zheng, X.-H. Wang, et al., "Evaluation of speckle quality in digital image correlation methods," Value Engineering, vol. 43, no. 26, pp. 133–135, 2024.
  12. B. Pan, D.-F. Wu, Y. Xia, "Quality evaluation of speckle patterns for digital image correlation," Journal of Experimental Mechanics, vol. 25, no. 2, pp. 120–129, 2010.
  13. Z. Wei, X.-L. Li, S.-L. Liu, et al., "Application of digital image correlation based on digitally designed speckle patterns in fracture crack detection," Journal of Hebei University of Technology, vol. 49, no. 6, pp. 69–75, 2020.